Dragon Scale 2ds case

Dragon Scale 2DS Case

Materials:
Hook (F)
Yarn (Fingerling)
Yarn Needle
Stitch marker
Button (I used 1.5”)


What you should know:
Chaining (ch)
Single crochet (sc)
Double crochet (dc)

Dragon scale stitch {Actually its called the crocodile stitch} (I try to explain it but it would probably be better if you look elsewhere on how to do it although i do it a bit different)

1: Ch 51 (leave a long tail to stitch the bottom together) sc in the second from the hook and then along slip stitch to the first sc (50)
2: Ch 2(this does not count as a dc and never will), dc in the sc you slp stch into “ch 1 skp stch dc 2 in the next” (This makes a V)  Repeat “” 9 times (10 V’s), ch 1 skp stch dc around rest (always mark the first stch here so you don’t lose it) slp stch in first dc (same thing for each row just slp stch in the first stitch)  (10V’s. 29 dc)
3: Ch 1, sc in the first dc you slp stched into, “5 dc down the first side of the V ch 2 then 5dc down the other side of the V” skipping one V work “” into the next V and continue like this till you have 5 scales, sc in the dc from last row. (5 scales, 29sc)
4: Ch 2, dc then work your V’s like in row 2, then dc in the rest (10 V’s, 29 dc)
5: Ch 1 , sc then do your scales in between the scales before to give it a staggered look (does that make cents?), sc in the dc’s from the last row. (5 scales, 29 sc)
*I stitched the bottom closed at this point but you can do it whenever {ps if your new remember to stitch it inside out!}*
6-?: Repeat row 4&5 till you have 10 rows of scales (or more or less you may have a looser or tighter tension just try it in there to see if it fits or is 5”)
**I stitched my button on now on the dc/sc side on the 7th row down (it should be a sc row)**
7: ch 2 dc, in the V row from before try to dc along evenly to the end of the scales (around 28 29)
8: Turn Ch 2, dc across (28 or 29)
9-15: repeat 8 (you may have to do it more or less times depending on were you put the button)
16: Turn ch 2, dc 14,  ch 2, then dc in the rest. (Ps you should test the button depending on the size you might just want to do 1 ch)
17: Turn ch 1, sc along FO

To finish you use your yarn needle to work in all the loose ends then vwa la it is done! You now have a scaly 2ds case, if you are ambitious you could change  the pattern to make something else like a regular ds case or a 3ds case!

I hope you had fun. =>.<=

Fake Knit Dishcloth

Fake Knit Dishcloth

Materials:
Tunisian Crochet hook
50g ball of cotton
Yarn Needle


Stitches
TSS- Tunisian Simple stitch
TKS- Tunisian Knit Stitch
TPS- Tunisian Purl Stitch



Pattern
-Ch 23 (You can do more if you want it to bigger than 7”)
-Start your row by going into the 3 rd bump, (this will make it so your work does not curl) TSS across.
-Do a row of TKS
-Do a row of TPS
Repeat the last two rows until you have it the right size.
Single crochet around your work this will make it look nicer and it will reduce curl if you have any.

Sans the Skeleton

What is a Skeleton’s favorite song? Bad to the Bone

Just had to put in a bad skeleton joke i do not know any puns so this it good enough.

To start with you need:
Yarn - White, Black, Blue, and Some Fake fur stuff(optional) (For original Sans)
Yarn Needle
Place markers
Hook (whatever size works with your yarn)

Notes
mr = magic ring
inc = increase
dec = decrease
FO = Finish of
"#" = How many times you do that round
triple HD dec = YO pick of 3 stitchs, yo go though 3, yarn over pull though 3
(Sorry about this being confusing basically just do decrease 3 to 1 with half double crochet)

Just to let you know you can just stuff most of this stuff periodically as you work on it.

Legs : (Start with white) x2
-6 sc in mr
-inc around
-sc around "2"
-switch to black, sc around "6"
Slip Stitch together with 2 stitches

Body : Still with black
-sc around (should be 20) "3"
-switch to white
-sc around "9"
-3 dec, triple HD dec, 4 dec, triple HD dec, 1 dec
- I just decreased around now until there was 6 stitches.

I forgot to but a white stripes on his pants so you can do a white chain and stitch it on

Skull : (White)
-sc 8 mr
-inc around
-inc 1 sc
-sc around "5"
-dec, dec, dec, 6sc, dec, dec, dec, sc in rest
-sc around
-inc, inc, inc, 6sc, inc, inc, inc, sc in rest
-sc around
-dec around
-dec around FO

Jacket : (Blue)
- ch 25 (This wraps around him)
-turn sc in 2nd stitch the sc along
-ch 1 turn sc along
 repeat until it the fits around the body nicely
 I did "9"

Hood : (Blue)
-Ch 16
-turn sc in 2nd ch from hook sc along
-turn ch 1 sc along "15"
You might want to check this to see if it fits your head if it doesn't you may have to add more to the chain of do more rows.
(P.s. I stitched my top part together before finishing so it was easier to try it on him)

Hands Palms (White) x4
-Ch 4
-sc in 2nd ch from hook sc along
-turn ch 1 sc along
*Add fingers to two of the palms by ch 3 fo, slip stitch to hand ch fo.
3 sc for fingers 2 sc for thumb

Bring the string from fingers down to the palm and tie to the tail of the finger it is better to do this one finger at a time as you make them (me i made the hand them was like hmm what should i do with all that finger string... The hand was also the first part of the body that I made) Then you take a palm without fingers and stitch it to the side that you put all your finger knot.

Arm (Blue) x2
-6 sc in mr
-inc around (You should stitch hand onto arm now or in a few rows)
-sc around "6" (This can be increased of decreased you should check it against the size of your body)

Face

Eyes (Black) x2
-sc 8 in mr fo
You can do whatever you want with them you can leave them black, or add little white dots, or give him a glowing eye.  Or if you want to you can just make on eye and stitch a crescent shape to make him winking

Stitch on a grin

Stitch triangle for nose (You could also use a piece of triangular felt)


Now did we have a sansational time making sans. There are many different sans in the fan art here is a like to a picture click here some for references.
I would have just said look it up but there is sum pretty weird stuff out there that may just traumatize you.

For a free pdf you can go to craftsy link

If there are any mistakes please tell me.

 i do not own sans, undertale belongs to toby fox

 

If you would like to share this pattern, link back to it. You can sell finished products. Thank you. I hope you enjoy!

Has not been tested!

Hand Muff

This can be made to fit on anyone, I used a weird chunky yarn that I got in a bag of random bag of yarn that i got from my Aunt so I have not idea what its called but you can use any type of chunky yarn or any size really but a chunky works better.




You will need about 2 oz of chunky yarn
Hook that works with that size yarn

First you can single crochet enough that is can fit around your hand you can either single crochet along it or you can slip stitch it together now.

Now you can half double crochet around and around until it is the length that you want it to be, then you slip stitch it to the body.

Then you chain until it can have it hanging around you neck and by your stomach. Then you slip stitch it to the body.

Navi Fairy Bookmark (legend of zelda)

Materials Needed
small amount of white and whatever you want the body color to be
yarn needle
crochet hook
bead (optional)

1- 6 sc in magic ring
2- inc around
change to white or whatever color you are doing the wings
3- ch 6, sc into the second ch from hook, hdc in next 4, slip stitch to body
4- repeat 3 making another wing
*If you wanted to you could put another set of wings on the other side and make it look like it is facing you I just did it as a side view because it was easier.*
Now you can add your body color or whatever color you like onto it under the wing a little bit. Then you can chain as much as you want to get to the length you want. You can add a bead at the end of make tassel for it whatever you want to do.
Heres a site that can show you how to do a tassel on a bookmark just look under the pattern.

Mine I did as Navi but you can do it what ever color you want here are some ideas

Navi

Tael

Tatle

                                   

Pink Fairy

Neri, Ciela, and Leaf

                  

Mini Majora's Mask

About 3 inches tall and 4 inches wide

Materials:
Yarn: purple, red, blue yellow, orange, green, black
Yarn Needle
Felt small amount black yellow, and orange
Crochet hook(I used 3.5mm)
Black Fabric Paint (optional)
Hot Glue gun and regular glue


Heart - In Purple

Make 2

Round 1 - 5 sc into the magic ring [5 sts]
Round 2 - 2sc in each st around. [10 sts]
Round 3 - (2 sc in next st, 1sc in next st) 5 times. [15 sts]
Rounds 4, 5 - sc around.

Do not fasten off for the second one

Round 6 - sc 1 (Think it might be two I did one) together, than sc around [28 dc]
Rounds 7, 8 - sc around. [28 sts]
Round 9 - (sc2tog, 5sc) 4 times. [24 sts]
Round 10 - sc around.
Stuff periodically after finished round
Round 11 - (sc2tog, 2sc) 6 times. [18 sts]
Round 12 - sc around.
Round 13  -(sc2tog, 1sc) 6 times. [12 sts]
Round 14 - (sc2tog 1 sc)
close and finish off

Click here to see heart balloon pattern I used to help me figure out how to make a heart

Spikes - 2 blue, 2 red, 2 green, 4 yellow
Round 1 - sc 3 into magic ring [3]
Round 2 - inc, Sc, Inc [5]
Round 3 - sc around [5]
Round 4 - sc, inc, sc, inc, sc [7]


Eyes Piece - Red x2
Round 1 - Sc 4 into magic ring [4]
Round 2 - inc around [8]
Round 3 - sc 1 and Finish off (This gives it the point at the end of the eye)

Eye Piece

Face Piece (work in rows)
Row 1 - sc 4
Row 2 - Turn sc 3
Row 3 - Ch 1 sc 3
Row 4 - Ch 1 sc, inc, inc
Row 5 - Ch 1 inc, sc, sc, inc
Row 6 - Ch 1 inc sc 1 in next 4, inc
Row 7 - Ch 1 sc across
Row 8 - Ch 1 dec, sc, dec, dec, sc, dec
Row 9 - Ch 1 dec, sc, sc, dec
Row 10 - Ch 1 dec, dec
Row 11 - Ch 1 dec

Detailing - 2 orange, 2 green
Row 1 - Sc 5
Row 2 - Turn skip 1 sc and sc 4 across FO

Eyes - 2
Cut small black square than cut carefully around it to make a small circle.
Glue it onto a yellow square and let dry and carefully cut abound again I placed it on the place it is suposed to be to check the size.
And repeat on the orange









Now Putting it Together
-First you sew on all the spikes in the right place I have a reference picture at bottom
-Then you can sew the face piece on having the pointy part at the bottom
-Now you can stitch the eye pieces on having that pointed part pointing to the outside
-Hot glue the eyes into place
-Now you can place the detailing on the orange piece at the top and then after you have it on you can do the black lines that are on it and green one goes by the green spike.
-You can stitch on orange triangles now if you want to
-I used fabric paint to make the nose hole dots and mouth hole dots
-I was going to do the white detailing on mine but it did not look very nice to me but you could try that if you want to

If you would like to share this pattern please link it back to this page. You may sell the finished product.

Skull Winter Mask

Front of Mask

Size: To fit an average sized adult’s Head

 Materials:
• 5mm hook
• Stitch markers
• 1 skein worsted weight yarn in colors:
black, white

Abbreviations/Special stitches:
• Ch- chain
• SS- slip stitch
• Sc- single crochet
• Dc- double crochet
• IncDc- 2 double crochet in one stitch
• ST(S)- stitches
• PM- place marker
Colors are assigned as follows:
• Color A- white
• Color B- black


The mask is started from the top of the head and increases are worked over the crown.

Round 1- With color A work 16 Dc into magic ring or
Ch4 slip stitch to work in the round. Ch3(this counts as a Dc) and 15 Dc into ring, or 
Start any way you like to just make sure you have 16DC
Round 2 - 2Dc into first dc or ch3, place  marker to establish beginning of your round. *1Dc, 1IncDc* ; repeat 7 times.(23)
Round 3- *1Dc, 1IncDc* ; repeat 10 times ending with 1 Dc at last st. (34)
Round 3-  1Dc into next st, *1 IncDc, 1Dc in next 2 sts*; repeat 10 times (45)
Round 4- 1Dc into next st, *1IncDc, 1Dc into next 2 stitchs*; repeat 14 times(60)
Rounds 5 - 11: Dc in each around.
Round 12- PM, *1Sc into each of next 7 sts, PM, (this marks the first eye hole), 1Dc into each of next 4 sts, PM, 1Sc into each of next 7 sts, PM. Work remainder of round in DC.
Round 13- Ch3, turn work; work evenly across back of hat to marker.
Round 14- Ch3, turn work; work evenly across back of hat back to the other marker.
Leave this row for now and join a new piece of yarn to work the space between the eyes. Join a new piece of yarn at the top of the first dc (of four) and Ch 3; 1Dc into each of next 3 sts; cut yarn.
Round 15- Return to the live row and Ch7, 1Dc into top of ch3 (between the eyes) 1Dc into each of next 3 sts, Ch7. 1Dc into top of next ch3, *1Dc into next st*; repeat from * to marker at first eye hole. Work 1Dc in each ch across (7 sts), 1Dc into next 4 sts, 1Dc in each ch across (7 sts). 1Dc into top of ch3, 1Dc in each of next 10 sts, 1SC into each of next 6 sts, 1SS, cut yarn.

(I have an alternative way written at the end to do this in rounds instead of doing it rows if you do not want this look it kind of looks like a wrestler mask the way it is)

From this point on, the rest of the mask will be worked flat, back and forth and no longer in the round. Fold piece in half, making sure to line the eyeholes together. Establish the very center of the stitches at back of the mask. There should be 6. Count three on either side, and PM at each end; DO NOT WORK OVER THESE 6 STS. Join color B in the very next stitch.

Row 16- Ch3,(this is always considered a Dc) 1Dc in each of next 9 sts  (10 sts in black total). Switch to color A and work 1Dc into each of next 32 sts across. Switch back to color B and work 1Dc into each of next 10 sts.
Row 17- Ch3, turn. Work the same as previous row.
Row 18- Ch3, turn. 1Dc in each of next 10 sts across. Switch to color A and work 1Dc into each of next 30 sts across. Switch back to color B and work 1Dc into each of next 11 sts.
Row 19- Ch3, turn. 1Dc in each of next 11 sts across. Switch to color A and work 1Dc into each of next 28 sts across. Switch back to color B and work 1Dc into each of next 12 sts.
Row 20- Ch3, turn. 1Dc in each of next 12 sts across. Switch to color A and work 1Dc into each of next 26 sts across. Switch back to color B and work 1Dc into each of next 13 sts.
Row 21- Ch3, turn. 1Dc in each of next 13 sts across. Switch to color A and work 1DC into each of next 24 sts across. Switch back to color B and work 1DC into each of next 14 sts.
Row 22- Ch3, turn. 1Dc in each of next 14 sts across. Switch to color A and work *1Dc into each of next 2 sts, skip 1 st, 1Dc into each of next 3 sts, skip 1, 1DC into next 2 sts, skip 1 (2 times), 1Dc into each of next 3 sts, skip 1, 1Dc in each of next 2 sts. Switch back to color B and work 1Dc into each of next 15 sts.
Row 23- Ch3, turn. Work an even row of Dc across. (you can repeat this until it reaches the desired length)

Alternative 
  Fold piece in half, making sure to line the eye-holes together. Establish the very center of the stitches at back of the mask. There should be 6. Count three on either side, join color B in the very next stitch. (I may not have worded this right it is saying do the same thing as before but you will be working into the 6 sc you would not do with the other way)

Round 15- Ch3, 1Dc in each of next 9 sts  (10 sts in black total). Switch to color A and work 1Dc into each of next 32 sts across. Switch back to color B and work 1Dc into each of next 16 sts.
Round 16-  1Dc in next 10sts. Switch to color A 1Dc into next 32 sts. Switch back to color B and 1Dc into next 16 sts
Round 18- 1Dc in each of next 11 sts across.  Switch to color A and work 1Dc into each of next 30 sts across. Switch back to color B and work 1Dc into each of next 17 sts.
Round 19- 1Dc in each of next 12 sts across. Switch to color A and work 1Dc into each of next 28 sts across. Switch back to color B and work 1Dc into each of next 18 sts.
Round 20- 1Dc in each of next 13 sts across. Switch to color A and work 1Dc into each of next 26 sts across. Switch back to color B and work 1Dc into each of next 19 sts.
Round 21-  1Dc in each of next 14 sts across. Switch to color A and work 1DC into each of next 24 sts across. Switch back to color B and work 1DC into each of next 20 sts.
Round 22- 1Dc in each of next 15 sts across. Switch to color A and work *1Dc into each of next 2 sts, skip 1 st, 1Dc into each of next 3 sts, skip 1, 1DC into next 2 sts, skip 1 (2 times), 1Dc into each of next 3 sts, skip 1, 1Dc in each of next 2 sts. Switch back to color B and work 1Dc into each of next 15 sts.
Round 23- Dc around.(In Black) Repeat until it is the desired length

Spinal Column(not needed if you did the Alternative way)

Back of Mask

Row 1: Join  at the bottom corner of one of the flap openings in the back of the neck of the mask. CH1, and 1SC along the edge around the post of each dc stitch. (10 sts)
(diagram here)
When you reach the top at the white part of yarn (bottom of skull), skip the first st, 1SC into the next st, skip 1, 1SC into each of next 2 sts, skip 1, and continue down the other edge for 11 sts.
Row 2: CH1 turn; 1 SC in each of next 9 sts, skip 1, 1SC in each of next 11 sts; tie off and weave in the end.
Before continuing on to embellish the mask, with color B, join a new piece of yarn to one end along the very bottom of the mask and work 1SC evenly into the top of each st to the end; tie off and weave in the end.

Draw String
CH76 sts, 1SC into second ch from hook; work 1SC in each chain to end, weave in end. Starting at the top of the column (at the bottom of the skull) lace the draw string through the top of every other sc as if to thread shoe string.
Or you can use an shoe lace that is what I used

Mouth
I single crochet a line until i had gotten the length I wanted to have the vertical line, I did a ch 4 for the teeth. Then I just stitched it onto the place I wanted it.



Link To the original pattern