Mini Majora's Mask

About 3 inches tall and 4 inches wide

Materials:
Yarn: purple, red, blue yellow, orange, green, black
Yarn Needle
Felt small amount black yellow, and orange
Crochet hook(I used 3.5mm)
Black Fabric Paint (optional)
Hot Glue gun and regular glue


Heart - In Purple

Make 2

Round 1 - 5 sc into the magic ring [5 sts]
Round 2 - 2sc in each st around. [10 sts]
Round 3 - (2 sc in next st, 1sc in next st) 5 times. [15 sts]
Rounds 4, 5 - sc around.

Do not fasten off for the second one

Round 6 - sc 1 (Think it might be two I did one) together, than sc around [28 dc]
Rounds 7, 8 - sc around. [28 sts]
Round 9 - (sc2tog, 5sc) 4 times. [24 sts]
Round 10 - sc around.
Stuff periodically after finished round
Round 11 - (sc2tog, 2sc) 6 times. [18 sts]
Round 12 - sc around.
Round 13  -(sc2tog, 1sc) 6 times. [12 sts]
Round 14 - (sc2tog 1 sc)
close and finish off

Click here to see heart balloon pattern I used to help me figure out how to make a heart

Spikes - 2 blue, 2 red, 2 green, 4 yellow
Round 1 - sc 3 into magic ring [3]
Round 2 - inc, Sc, Inc [5]
Round 3 - sc around [5]
Round 4 - sc, inc, sc, inc, sc [7]


Eyes Piece - Red x2
Round 1 - Sc 4 into magic ring [4]
Round 2 - inc around [8]
Round 3 - sc 1 and Finish off (This gives it the point at the end of the eye)

Eye Piece

Face Piece (work in rows)
Row 1 - sc 4
Row 2 - Turn sc 3
Row 3 - Ch 1 sc 3
Row 4 - Ch 1 sc, inc, inc
Row 5 - Ch 1 inc, sc, sc, inc
Row 6 - Ch 1 inc sc 1 in next 4, inc
Row 7 - Ch 1 sc across
Row 8 - Ch 1 dec, sc, dec, dec, sc, dec
Row 9 - Ch 1 dec, sc, sc, dec
Row 10 - Ch 1 dec, dec
Row 11 - Ch 1 dec

Detailing - 2 orange, 2 green
Row 1 - Sc 5
Row 2 - Turn skip 1 sc and sc 4 across FO

Eyes - 2
Cut small black square than cut carefully around it to make a small circle.
Glue it onto a yellow square and let dry and carefully cut abound again I placed it on the place it is suposed to be to check the size.
And repeat on the orange









Now Putting it Together
-First you sew on all the spikes in the right place I have a reference picture at bottom
-Then you can sew the face piece on having the pointy part at the bottom
-Now you can stitch the eye pieces on having that pointed part pointing to the outside
-Hot glue the eyes into place
-Now you can place the detailing on the orange piece at the top and then after you have it on you can do the black lines that are on it and green one goes by the green spike.
-You can stitch on orange triangles now if you want to
-I used fabric paint to make the nose hole dots and mouth hole dots
-I was going to do the white detailing on mine but it did not look very nice to me but you could try that if you want to

If you would like to share this pattern please link it back to this page. You may sell the finished product.

Skull Winter Mask

Front of Mask

Size: To fit an average sized adult’s Head

 Materials:
• 5mm hook
• Stitch markers
• 1 skein worsted weight yarn in colors:
black, white

Abbreviations/Special stitches:
• Ch- chain
• SS- slip stitch
• Sc- single crochet
• Dc- double crochet
• IncDc- 2 double crochet in one stitch
• ST(S)- stitches
• PM- place marker
Colors are assigned as follows:
• Color A- white
• Color B- black


The mask is started from the top of the head and increases are worked over the crown.

Round 1- With color A work 16 Dc into magic ring or
Ch4 slip stitch to work in the round. Ch3(this counts as a Dc) and 15 Dc into ring, or 
Start any way you like to just make sure you have 16DC
Round 2 - 2Dc into first dc or ch3, place  marker to establish beginning of your round. *1Dc, 1IncDc* ; repeat 7 times.(23)
Round 3- *1Dc, 1IncDc* ; repeat 10 times ending with 1 Dc at last st. (34)
Round 3-  1Dc into next st, *1 IncDc, 1Dc in next 2 sts*; repeat 10 times (45)
Round 4- 1Dc into next st, *1IncDc, 1Dc into next 2 stitchs*; repeat 14 times(60)
Rounds 5 - 11: Dc in each around.
Round 12- PM, *1Sc into each of next 7 sts, PM, (this marks the first eye hole), 1Dc into each of next 4 sts, PM, 1Sc into each of next 7 sts, PM. Work remainder of round in DC.
Round 13- Ch3, turn work; work evenly across back of hat to marker.
Round 14- Ch3, turn work; work evenly across back of hat back to the other marker.
Leave this row for now and join a new piece of yarn to work the space between the eyes. Join a new piece of yarn at the top of the first dc (of four) and Ch 3; 1Dc into each of next 3 sts; cut yarn.
Round 15- Return to the live row and Ch7, 1Dc into top of ch3 (between the eyes) 1Dc into each of next 3 sts, Ch7. 1Dc into top of next ch3, *1Dc into next st*; repeat from * to marker at first eye hole. Work 1Dc in each ch across (7 sts), 1Dc into next 4 sts, 1Dc in each ch across (7 sts). 1Dc into top of ch3, 1Dc in each of next 10 sts, 1SC into each of next 6 sts, 1SS, cut yarn.

(I have an alternative way written at the end to do this in rounds instead of doing it rows if you do not want this look it kind of looks like a wrestler mask the way it is)

From this point on, the rest of the mask will be worked flat, back and forth and no longer in the round. Fold piece in half, making sure to line the eyeholes together. Establish the very center of the stitches at back of the mask. There should be 6. Count three on either side, and PM at each end; DO NOT WORK OVER THESE 6 STS. Join color B in the very next stitch.

Row 16- Ch3,(this is always considered a Dc) 1Dc in each of next 9 sts  (10 sts in black total). Switch to color A and work 1Dc into each of next 32 sts across. Switch back to color B and work 1Dc into each of next 10 sts.
Row 17- Ch3, turn. Work the same as previous row.
Row 18- Ch3, turn. 1Dc in each of next 10 sts across. Switch to color A and work 1Dc into each of next 30 sts across. Switch back to color B and work 1Dc into each of next 11 sts.
Row 19- Ch3, turn. 1Dc in each of next 11 sts across. Switch to color A and work 1Dc into each of next 28 sts across. Switch back to color B and work 1Dc into each of next 12 sts.
Row 20- Ch3, turn. 1Dc in each of next 12 sts across. Switch to color A and work 1Dc into each of next 26 sts across. Switch back to color B and work 1Dc into each of next 13 sts.
Row 21- Ch3, turn. 1Dc in each of next 13 sts across. Switch to color A and work 1DC into each of next 24 sts across. Switch back to color B and work 1DC into each of next 14 sts.
Row 22- Ch3, turn. 1Dc in each of next 14 sts across. Switch to color A and work *1Dc into each of next 2 sts, skip 1 st, 1Dc into each of next 3 sts, skip 1, 1DC into next 2 sts, skip 1 (2 times), 1Dc into each of next 3 sts, skip 1, 1Dc in each of next 2 sts. Switch back to color B and work 1Dc into each of next 15 sts.
Row 23- Ch3, turn. Work an even row of Dc across. (you can repeat this until it reaches the desired length)

Alternative 
  Fold piece in half, making sure to line the eye-holes together. Establish the very center of the stitches at back of the mask. There should be 6. Count three on either side, join color B in the very next stitch. (I may not have worded this right it is saying do the same thing as before but you will be working into the 6 sc you would not do with the other way)

Round 15- Ch3, 1Dc in each of next 9 sts  (10 sts in black total). Switch to color A and work 1Dc into each of next 32 sts across. Switch back to color B and work 1Dc into each of next 16 sts.
Round 16-  1Dc in next 10sts. Switch to color A 1Dc into next 32 sts. Switch back to color B and 1Dc into next 16 sts
Round 18- 1Dc in each of next 11 sts across.  Switch to color A and work 1Dc into each of next 30 sts across. Switch back to color B and work 1Dc into each of next 17 sts.
Round 19- 1Dc in each of next 12 sts across. Switch to color A and work 1Dc into each of next 28 sts across. Switch back to color B and work 1Dc into each of next 18 sts.
Round 20- 1Dc in each of next 13 sts across. Switch to color A and work 1Dc into each of next 26 sts across. Switch back to color B and work 1Dc into each of next 19 sts.
Round 21-  1Dc in each of next 14 sts across. Switch to color A and work 1DC into each of next 24 sts across. Switch back to color B and work 1DC into each of next 20 sts.
Round 22- 1Dc in each of next 15 sts across. Switch to color A and work *1Dc into each of next 2 sts, skip 1 st, 1Dc into each of next 3 sts, skip 1, 1DC into next 2 sts, skip 1 (2 times), 1Dc into each of next 3 sts, skip 1, 1Dc in each of next 2 sts. Switch back to color B and work 1Dc into each of next 15 sts.
Round 23- Dc around.(In Black) Repeat until it is the desired length

Spinal Column(not needed if you did the Alternative way)

Back of Mask

Row 1: Join  at the bottom corner of one of the flap openings in the back of the neck of the mask. CH1, and 1SC along the edge around the post of each dc stitch. (10 sts)
(diagram here)
When you reach the top at the white part of yarn (bottom of skull), skip the first st, 1SC into the next st, skip 1, 1SC into each of next 2 sts, skip 1, and continue down the other edge for 11 sts.
Row 2: CH1 turn; 1 SC in each of next 9 sts, skip 1, 1SC in each of next 11 sts; tie off and weave in the end.
Before continuing on to embellish the mask, with color B, join a new piece of yarn to one end along the very bottom of the mask and work 1SC evenly into the top of each st to the end; tie off and weave in the end.

Draw String
CH76 sts, 1SC into second ch from hook; work 1SC in each chain to end, weave in end. Starting at the top of the column (at the bottom of the skull) lace the draw string through the top of every other sc as if to thread shoe string.
Or you can use an shoe lace that is what I used

Mouth
I single crochet a line until i had gotten the length I wanted to have the vertical line, I did a ch 4 for the teeth. Then I just stitched it onto the place I wanted it.



Link To the original pattern